TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 1019 of 1170
TM 9-2320-280-20-3 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) D-46.2 Change 2 12 VOLT ALTERNATOR CABLE ASSEMBLY CABLE CUT LENGTH MANUFACTURED END TERMINAL END INSULATOR PART NUMBER (INCHES) FROM P/N PART NUMBER PART NUMBER 12446821 102 M13486/1-9 MS20659-108 12460417 MATERIAL BLOCK STOCK SIZE DESCRIPTION SPECIFICATION "O" GAGE WIRE, ELECTRICAL MIL-C-13486 INSTRUCTIONS: 1. Cut cable to length as shown. 2. Cut of 92.50 inches spiral wrap from bulk and install as shown. Secure spiral wrap in position with tape at both ends. 3. Select and solder proper end terminals to cable ends as shown. (Refer to TC 9-237 for soldering instructions.) 4. Install insulator and insulator boot to cable ends as shown. 5. Mark and install identification bands using old cable as reference. Figure D-62.1. 12 Volt Alternator Cable Assembly.