TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 3 Download
Page 1018 of 1170
TM 9-2320-280-20-3 Change 2 D-46.1 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd) 200 AMP ALTERNATOR CABLE ASSEMBLY CABLE CUT LENGTH MANUFACTURED END TERMINAL END INSULATOR PART NUMBER (INCHES) FROM NSN NSN NSN 5582451 58 6145-00-705-6674 5940-00-735-5520 5970-00-174-9449 INSTRUCTIONS: 1. Cut cable to length as shown. 2. Cut 14 inches of spiral wrap from bulk and install as shown. Secure spiral wrap in position with black tape at both ends. 3. Select and solder proper end terminals to cable ends as shown. (Refer to TC 9-237 for soldering instructions.) 4. Install insulator and insulator boot to cable ends as shown. 5. Mark and install identification bands using old cable as reference. Figure D-62. 200 Amp Alternator Cable Assembly. MATERIAL BLOCK STOCK SIZE DESCRIPTION SPECIFICATION "O" GAGE WIRE, ELECTRICAL MIL-C-13486