TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download

Page 98 of 953

TM 9-2320-280-20-2 3-40. LEFT FUEL INJECTION LINES BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Equipment Condition General mechanic’s tool kit: Hood raised and secured (TM 9-2320-280-10). automotive (Appendix B, Item 1) Engine access cover removed (para. 10-15). Manual References TM 9-2320-280-10 TM 9-2320-280-24P a. Removal 1. Remove screw-assembled washer (2) and clamp (1) from bracket (5). 2. Remove screw-assembled washer (8) and clamp (9) from bracket (5). 3. Remove two screw-assembled washers (3) and oil dipstick tube (4) from bracket (5). 4. Remove two nuts (6), washers (7) and bracket (5) from valve cover studs (10). b. Installation 1. Install bracket (5) to valve cover studs (10) with two washers (7) and nuts (6). Tighten nuts (6) to 13-20 lb-ft (18-27 N.m). 2. Secure oil dipstick tube (4) to bracket (5) with two screw-assembled washers (3). Tighten screw- assembled washers (3) to 3-4 lb-ft (4-5 N.m). 3. Install clamp (9) to bracket (5) with screw-assembled washer (8). Tighten screw-assembled washer (8) to 3-4 lb-ft (4-5 N.m). 4. Install clamp (1) to bracket (5) with screw-assembled washer (2). Tighten screw-assembled washer (2) to 3-4 lb-ft (4-5 N.m). 3-76 FOLLOW-ON TASKS: Install engine access cover (para. 10-15). Lower and secure hood (TM 9-2320-280-10).