TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 97 of 953
TM 9-2320-280-20-2 3-39. RIGHT FUEL INJECTION LINES BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Equipment Condition General mechanic’s tool kit: Engine access cover removed (para. 10-15). automotive (Appendix B, Item 1) Air horn removed (para. 3-14). Manual References TM 9-2320-280-24P a. Removal 1. Remove two screw-assembled washers (6), clamps (5), and clamp (7) from bracket (1). 2. Remove two clamps (5) and inspect for cracks or breaks. Replace if defective. 3. Remove two nuts (3), washers (2), and bracket (1) from valve cover studs (4). b. Installation 1. Install bracket (1) to valve cover studs (4) with two washers (2) and nuts (3). Tighten nuts (3) to 13-20 lb-ft (18-27 Nom). 2. Install two clamps (5) and clamp (7) to bracket (1) with two screw-assembled washers (6). Tighten screw-assembled washers (6) to 3-4 lb-ft (4-5 N.m). FOLLOW-ON TASKS: Install air horn (para. 3-14). Install engine access cover (para. 10-15). 3-75