TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 919 of 953
9-16. REAR CROSSMEMBER REPLACEMENT INITIAL SETUP: Tools General mechanic's tool kit: automotive (Appendix B, Item 1) Materials/Parts Four locknuts (Appendix G, Item 81) Manual References TM 9-2320-280-24P Equipment Condition Rear crossmember braces removed (para. 9-9). This task covers: a. Removal b. Installation FOLLOW-ON TASK: Install rear crossmember braces (para. 9-9). Remove four locknuts (3), washers (2), capscrews (5), washers (2), and rear crossmember (1) from two rear crossmember mounting brackets (4). Discard locknuts (3). Install rear crossmember (1) on two rear crossmember mounting brackets (4) with four washers (2), capscrews (5), washers (2), and locknuts (3). Tighten locknuts (3) to 90 lb-ft (122 N•m). b. Installation a. Removal TM 9-2320-280-20-2 9-24 Change 3