TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 903 of 953
9-7. RADIATOR FRONT MOUNT BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 81) Locknut (Appendix G, Item 99) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Hood raised and secured (TM 9-2320-280-10) 1. Remove locknut (3), washer (2), capscrew (10), washer (2), and spacer (9) from radiator (4) and front mount bracket (11). Discard locknut (3). 2. Remove two locknuts (7), washers (8), capscrews (1), washers (8), bracket (11), and mount (6) from front suspension crossmember (5). Discard locknuts (7). 1. Install mount (6) and bracket (11) on front suspension crossmember (5) with two washers (8), capscrews (1), washers (8), and locknuts (7). Tighten locknuts (7) to 90 lb-ft (122 N• m). 2. Install radiator (4) on bracket (11) with spacer (9), washer (2), capscrew (10), washer (2), and locknut (3). Tighten locknut (3) to 30 lb-ft (41 N•m). b. Installation a. Removal TM 9-2320-280-20-2 Change 3 9-9 FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10). 1 8 4 5 6 7 8 9 2 10 11 2 3