TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 862 of 953
8-20. INTERMEDIATE STEERING SHAFT REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove locknut (6), washer (5), capscrew (8), and washer (5) from intermediate steering shaft (4) and steering gear (7). Discard locknut (6). 2. Remove locknut (2), washer (3), capscrew (9), washer (3), and steering shaft (4) from steering column (1). Discard locknut (2). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 100) Manual References TM 9-2320-280-10 TM 9-2320-280-24P b. Installation 1. Install intermediate steering shaft (4) on steering gear (7) with washer (5), capscrew (8), washer (5), and locknut (6). Tighten locknut (6) to 40-50 lb-ft (54-68 N • m). 2. Install steering shaft (4) on steering column (1) with washer (3), capscrew (9), washer (3), and locknut (2). Tighten locknut (2) to 40-50 lb-ft (54-68 N • m). TM 9-2320-280-20-2 8-62 Change 3 NOTE Ensure front wheels are in straight-ahead position while removing and installing intermediate steering shaft.