TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 829 of 953
TM 9-2320-280-20-2 8-8. INNER RIM STUD MAINTENANCE (Cont’d) WARNING Never inflate a wheel assembly before checking wheel locknut torques to ensure the wheel locknuts are tightened to specifications. An assembly with improperly tightened locknuts could separate under pressure, resulting in serious injury or death. Always use a tire inflation cage for inflation purposes. Stand on one side of the cage during inflation, never directly in front. Keep hands out of cage during inflation. Inflate assembly to recommended pressure, using a clip-on air chuck. Do not exceed 50 psi (345 kPa) cold inflation pressure. Failure to follow these instructions may result in serious injury or death. 10. Place tire assembly (5) in safety cage and inflate front and rear tires to recommended tire pressure (TM 9-2320-280-10). 11. Check for leaks around rim edges, insert, FOLLOW-ON TASK: Install wheel (para. and valve bore (8) with soapy solution. 8-3). 8-29