TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 81 of 953
3-31. FUEL TANK HANGERS REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Adhesive (Appendix C, Item 1) Manual References TM 9-2320-280-24P Equipment Condition Fuel tank removed (para. 3-24). 1. Remove two nuts (3), washers (4), screws (5), and rear hangers (7) from supports (6). 2. Twist two front hangers (9) until tee handles (2) clear slots (11) in supports (1) and remove front hangers (9). NOTE Perform step 3 for “A2” vehicles only. 3. Inspect four insulators (8) on front and rear hangers (9) and (7). Remove insulators (8) if damaged. NOTE Perform step 1 for “A2” vehicles only. 1. Install four insulators (8) on front and rear hangers (9) and (7) (if removed.) 2. Install two front hangers (9) by inserting tee handles (2) up through slots (11) in supports (1). Twist hangers (9) so that tee handles (2) are resting across slots (11) against side of ridge (10). NOTE Apply adhesive to threads of screws. 3. Install two rear hangers (7) on supports (6) with screws (5), washers (4), and nuts (3). Tighten nuts (3) to 37 lb-ft (50 N•m). b. Installation a. Removal TM 9-2320-280-20-2 Change 3 3-59 FOLLOW-ON TASK: Install fuel tank (para. 3-24).