TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 80 of 953
TM 9-2320-280-20-2 3-30. FILLER SPOUT HOSE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Equipment Condition General mechanic’s tool kit: Fuel tank drained (para. 3-24). automotive (Appendix B, Item 1) General Safety Instructions Manual References Do not perform this procedure near fire, flames, or TM 9-2320-280-10 sparks. TM 9-2320-280-24P WARNING Diesel fuel is highly flammable. Do not perform this procedure near fire, flames, or sparks. Severe injury or death will result. a. Removal 1. Loosen clamps (4) and (3) securing hose (1) to fuel tank (5) and to filler spout (2). 2. Slide hose (1) on to filler spout (2) until disconnected from fuel tank (5). Remove hose (1) from filler spout (2). b. Installation NOTE Position clamps attaching filler hose to fuel tank as shown. 1. Install hose (1) on filler spout (2) and slide on filler spout (2) until the hose (1) clears fuel tank (5). 2. Connect hose (1) to fuel tank (5) and tighten clamps (3) and (4). FOLLOW-ON TASK: Fill fuel tank (TM 9-2320-280-10) and check for leaks. 3-58