TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 789 of 953
8-4. TIRE, WHEEL, AND RUNFLAT MAINTENANCE (Cont'd) WARNING Never inflate a wheel assembly with the wheel locknuts removed in an attempt to separate inner and outer rim halves. The assembly will separate under pressure, resulting in serious injury or death. 5. Remove rim half (2) from tire (6). 6. Remove tire (6) from rim half (8). 7. Remove O-ring (7) from rim half (8). Cut O-ring (7) in two, to make sure that it cannot be reused. Discard O-ring (7). 8. Remove four locknuts (11), flange bolts (9), and runflat halves (10) from tire (6). Discard lock- nuts (11). 9. Remove balance weights (5) from rim halves (2) and (8) (if present). Discard balance weights (5). TM 9-2320-280-20-2 Change 3 8-9