TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 745 of 953
7-34 Change 2 NOTE • Installation procedures are basically the same for all caliper to tee brake lines except M1123 and “A2” vehicles. • Steps 1 through 4 covers the right rear caliper to tee line (basic and A1). • Perform steps 5 through 9 for the left front caliper to tee line (M1123 and “A2”). • Perform steps 10 through 15 for the left rear caliper to tee line (M1123 and “A2”). 1. Connect brake line (1) to rear tee (5) at forward rear crossmember (4). 2. Connect brake line (1) to caliper (7). 3. Install brake line (1) and vent line (3) in clamp (2). 4. Install brake line (1), vent line (3), and clamp (2) to forward rear crossmember (4) with capscrew (6). 7-15. BRAKE LINES REPLACEMENT (Cont’d) TM 9-2320-280-20-2 b. Caliper to Tee Brake Line Installation