TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 704 of 953
TM 9-2320-280-20-2 6-31. SHOCK ABSORBER REPLACEMENT (Cont’d) 5. 6. 7. 8. NOTE Perform steps 5 through 8 if necessary to reassemble body mount bracket to frame and rear bumper. Install tiedown bracket (3) and body mount bracket (6) on rear bumper (2) with two washerS (5), capscrews (4), washers (5), and locknuts (7). Secure body mount bracket (6) to rear bumper (2) with two washers (5), capscrews (4), washers (5), and locknuts (7). Secure bumper bracket (9) and plate (8) to frame (1) with four washers (11), capscrews (10), washers (11), and locknuts (12). Tighten capscrews (10) and locknuts (7) to 90 lb-ft (122 N-m). FOLLOW-ON TASKS: Lower and secure hood (TM 9-2320-280-10), (front shock absorbers only) M1037 and M1042 only: Install shelter (para. 11-120), (rear shock absorbers only). Remove support from lower control arm (para. 6-29). Install rear wheel (para. 8-3), (rear shock absorbers only). 6-72