TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 688 of 953
a. Removal 1. Remove locknut (1) and two washers (2) from bar link (3) and stabilizer bar (4). Discard locknut (1). 2. Remove capscrew (5), two washers (6), and bar link (3) from lower control arm (7). b. Installation 1. Apply sealing compound to threads of capscrew (5). Install bar link (3) to lower control arm (7) with two washers (6) and capscrew (5). Tighten capscrew (5) to 70 lb-ft (95 N • m). 2. Install bar link (3) to stabilizer bar (4) with two washers (2) and locknut (1). Tighten locknut (1) to 75 lb-ft (102 N • m). 6-24. STABILIZER BAR LINK REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Locknut (Appendix G, Item 80) Sealing compound (Appendix C, Item 46) TM 9-2320-280-20-2 6-56 Change 3 Manual References TM 9-2320-280-24P