TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 679 of 953
TM 9-2320-280-20-2 6-18. FRONT GEARED HUB VENT LINE REPLACEMENT (Cont’d) 4. Position 11.5 to 12.5 inches (29.2 to 31.8 cm) of hose (1) between two existing outer clamps (2) and secure existing clamps (2) with screws (3). Ensure center clamp (2) is positioned as shown. 5. Bend 90° bracket (14) on geared hub (7) 30° outward as shown. NOTE Do not close loop on clamps installed on control arms. Hose lines should move freely through control arm clamp loops. 6. Install new clamp (13) on vent line hose (1), and control arm (8) with screw (10), washer nut (11). (12), and FOLLOW-ON TASK: Install wheel (para. 8-3). 6-47