TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 672 of 953
6-15. WHEEL STUD REPLACEMENT CAUTION Always wear eye protection when replacing wheel studs. Severe eye injury may result if metal chips contact eyes. 1. Rotate spindle (3) to allow clearance for removal of stud (4) from spindle (3). 2. Drive stud (4) from spindle (3). Discard stud (4). 1. Align splines on stud (4) with splines in spindle (3) and install stud (4) in spindle (3). 2. Install three flat washers (2) and hex nut (1) on stud (4). 3. Tighten hex nut (1) until head on stud (4) seats against spindle (3). 4. Remove and discard hex nut (1) and three flat washers (2). b. Assembly a. Removal This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1)) Materials/Parts Three washers (Appendix G, Item 35) Hex nut (Appendix G, Item 64) Manual References TM 9-2320-280-24P Equipment Condition Wheel removed (para. 8-3). General Safety Instructions Always wear eye protection when replacing wheel studs. TM 9-2320-280-20-2 6-40 Change 3 FOLLOW-ON TASK: Install wheel (para. 8-3). 1 3 4 2