TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 652 of 953
6-9. HALFSHAFT MAINTENANCE (Cont’d) TM 9-2320-280-20-2 6-22 Change 2 NOTE • Perform steps 13 and 14 for all models except M1097, M1123, and “A1” and “A2” series vehicles. • Perform steps 15 and 16 for M1097 and “A1” series vehicles. • Perform steps 16.1 through 16.5 for M1123 and “A2” series vehicles. 13. Install spacer (3) and retainer ring (2) on shaft (4). 14. Align splines of inner race (1) with open spline of shaft (4). Use press to install inner race (1) until it snaps in place. 15. Align splines of inner race (1) with open spline on shaft (4). Use press to install inner race (1) on shaft (4) until inner race (1) seats into place. 16. Install retainer ring (6) in upper groove of shaft (4) behind inner race (1).