TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 640 of 953
TM 9-2320-280-20-2 6-5. REAR PROPELLER SHAFT MAINTENANCE (1330 SERIES) This task covers: a. Removal c. Installation b. Inspection INITIAL SETUP: Applicable Models Manual References M1097, “A1” and “A2” series TM 9-2320-280-10 TM 9-2320-280-24P Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) 1. Chock wheels and release parking brake (TM 9-2320-280-10). 2. Remove four capscrews (6), two straps (5), and disconnect propeller shaft (3) from differential pinion yoke (4). 3. Slide propeller shaft end yoke (1) out of transfer case extension (2) and remove propeller shaft (3). b. Inspection 1. Inspect propeller shaft (3) for cracks and dents. Replace if cracked or dented. 2. Inspect grease fittings and universal joints for serviceability. Replace universal joints (para. 6-6) or grease fittings if unserviceable. 3. Inspect splined end of end yoke (1) for damage. Replace end yoke (1) if damaged (para. 6-6). c. Installation 1. Slide propeller shaft end yoke (1) on transfer case extension (2) and install propeller shaft (3). 2. Connect propeller shaft (3) to differential pinion yoke (4) with two straps (5) and four capscrews (6). Tighten capscrews (6) to 13-18 lb-ft (18-24 N m). 3. Apply parking brake (TM 9-2320-280-10) and remove wheel chocks. 6-10