TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 625 of 953
TM 9-2320-280-20-2 5-52.2 Change 3 5-25. TRANSFER CASE VENT LINE REPLACEMENT (Cont’d) 13. Remove capscrew (1) from bracket (2) on frame rail (3). 14. Remove capscrew (4) and clamp (5) from bracket (2) and remove clamp (5) from hose (6) and vent line (7). 15. Deleted. 16. Disconnect vent lines (8) and (12) from elbow (10). 17. Disconnect vent line (15) from elbow (13) on air cleaner (14) and tee (16). 18. Remove elbow (13) from air cleaner (14) 19. Remove vent lines (17) and (18) from tee (16). 20. Deleted. NOTE • Perform steps 1 through 14 for new configuration. • Perform steps 15 through 19 for old configuration. 1. Install vent lines (17) and (18) on tee (16). 2. Deleted. 3. Install elbow (13) on air cleaner (14). 4. Connect vent line (15) to elbow (13) and tee (16). 5. Connect vent lines (8) and (12) to elbow (10). 6. Deleted. 7. Position bracket (2) on frame rail (3) and secure with capscrew (1). 8. Route existing hose (6) and vent line hose (7) through clamp (5) and secure to bracket (2) with capscrew (4). b. Installation