TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 623 of 953
TM 9-2320-280-20-2 5-25. TRANSFER CASE VENT LINE REPLACEMENT NOTE • Perform steps 1 through 5 for old configuration. • Perform steps 6 through 20 for new configuration. 1. Disconnect vent line (2) from elbow (1). 2. Remove elbow (1) from transfer case (3). 3. Remove two capscrews (5), clamps (4), and vent line (2) from bracket (8) and transmission governor cover (6). 4. Disconnect three vent lines (2) from tee (7). 5. Remove clamps (4) from vent line (2). 6. Disconnect vent line (11) from elbow (10). 7. Remove elbow (10) and pipe nipple (9) from transfer case (3). 8. Remove two capscrews (5), clamps (4), and vent line (11) from bracket (8) and transmission governor cover (6). 9. Deleted. 10. Disconnect vent lines (11) and (13) from elbow (16). 11. Remove clamps (4) from vent line (11). 12. Disconnect vent line (13) from elbow (14). a. Removal INITIAL SETUP: 5-52 Change 3 This task covers: a. Removal b. Installation Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-280-24P