TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 609 of 953
TM 9-2320-280-20-2 5-38 Change 3 5-16. TRANSMISSION VENT LINE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: 1. Remove vent line (2) from transmission (3) and tee fitting (1). 2. Remove vent line (12) from tee fittings (1) and (11). 3. Remove capscrew (5), clamp (7), and vent line (10) from engine mount bracket (6). 4. Remove capscrew (4), clamp (8), and vent line (10) from bracket (9). 5. Remove vent line (10) from tee fittings (11) and (13). 6. Remove clamps (7) and (8) from vent line (10). 1. Install clamps (7) and (8) on vent line (10). 2. Install vent line (10) on tee fittings (11) and (13). 3. Install vent line (10) and clamp (7) on engine mount bracket (6) with capscrew (5). 4. Install vent line (10) and clamp (8) on bracket (9) with capscrew (4). 5. Install vent line (12) on tee fittings (11) and (1). 6. Install vent line (2) on tee fittings (1) and transmission (3). 7. Apply adhesive sealant around fittings (1), (11), and (13). b. Installation a. Removal Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Adhesive sealant (Appendix C, Item 9) Manual References TM 9-2320-280-24P