TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 601 of 953
TM 9-2320-280-20-2 5-30 Change 3 5-12. TRANSMISSION SHIFT ROD MAINTENANCE (3L80) This task covers: a. Removal c. Adjustment b. Installation 1. Place transmission shift lever arm (7) to “N’’ (neutral) position. 2. Remove cotter pin (9) and washer (8) from shift rod trunnion (6) and shift lever arm (7). Discard cotter pin (9). 3. Remove cotter pin (1) and washer (2) from shift rod trunnion (4) and transmission selector lever (3) and disconnect shift rod (5). Discard cotter pin (1). 4. Remove shift rod trunnion (6) from shift rod (5). 1. Install shift rod trunnion (6) to shift rod (5). 2. Connect shift rod trunnion (4) to transmission selector lever (3) with washer (2) and cotter pin (1). 3. Adjust shift rod (para. c). CAUTION If the manual control linkage arm is not in the proper detent for each transmission selector lever position, transmission will be damaged. 1. Move shifter (10) into “1’’ position and ensure transmission selector lever (3) is in the forward position, “1’’. 2. Turn shift rod trunnion (6) so that it slips easily into hole in the shift lever arm (7). 3. Secure shift rod (5) and trunnion (6) to shift lever arm (7) with washer (8) and cotter pin (9). c. Adjustment b. Installation a. Removal INITIAL SETUP: Applicable Models All vehicles except: M997A2, M1025A2, M1035A2, M1043A2, M1045A2, M1097A2, M1123 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two cotter pins (Appendix G, Item 12) Manual References TM 9-2320-280-10 TM 9-2320-280-24P