TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 591 of 953
5-8. SHIFT CONTROLS HOUSING ASSEMBLY (SF-5583581) MAINTENANCE This task covers: a. Disassembly b. Assembly a. Disassembly 1. Remove knob (4) from transfer shift tube (6). 2. Remove button (2) from transmission shift knob (1). 3. Remove knob (1) from transmission shift tube (17). 4. Remove neutral start switch leads (10) from openings (12) in boot (11). 5. Slide rubber boot (11) off shift controls housing assembly (9). 6. Remove two nuts (8), washers (5), and shift selector indicator (3) from bezel (7). INITIAL SETUP: Applicable Models All vehicles except: M997A2, M1025A2, M1035A2, M1043A2, M1045A2, M1097A2, M1123 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-280-24P Equipment Condition Shift controls housing assembly removed (para. 5-7). b. Assembly TM 9-2320-280-20-2 5-20 Change 2 1. Install shift selector indicator (3) and two washers (5) on bezel (7) with two nuts (8). 2. Install rubber boot (11) on shift controls housing assembly (9), placing neutral start switch leads (10) through openings (12) in boot (11). 3. Place shift indicator lead (14) through opening (13) in boot (11). 4. Slide rubber boot (11) onto shift controls housing assembly (9). Ensure that mounting screw holes (16) in shift control housing assembly (9) align with holes (15) in boot (11). 5. Install knob (1) on transmission shift tube (17). 6. Install button (2) on transmission shift knob (1). 7. Install knob (4) on transfer shift tube (6).