TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 554 of 953
4-125. HEAT/VENT CONTROL PANEL REMOVAL (M996, M996A1) This task covers: a. Removal b. Installation a. Removal 1. Remove plug button (1) from control arm (2) and blower duct arm (5). Discard plug button (1). 2. Disconnect vent door control arm (3) from switch lever assembly (4). 3. Remove four screws (7), control panel (8), and control arm (2) from body (6). b. Installation 1. Connect control arm (2) to switch lever assembly (4) and install control panel (8) on body (6) with four screws (7). 2. Connect vent door control arm (3) to switch lever assembly (4). 3. Install control arm (2) on blower duct arm (5) with plug button (1). INITIAL SETUP: Applicable Models M996, M996A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Plug button (Appendix G, Item 8) Manual References TM 9-2320-280-24P Equipment Condition • Battery ground cable disconnected (para. 4-73). • Heater compartment panel removal (para. 11- 204). TM 9-2320-280-20-2 4-308 Change 3