TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 511 of 953
4-112. 200 AMPERE ALTERNATOR CABLE (12339317) REPLACEMENT (Cont’d) FOLLOW-ON TASKS: • Lower and secure hood (TM 9-2320-280-10). • Connect battery ground cable (para. 4-73). • Start engine and check operation of voltmeter gauge (TM 9-2320-280-10) TM 9-2320-280-20-2 Change 3 4-265 5. Install clamp (22) on cable (8) and secure clamp (21) to compressor (18) with washer (20) and nut (19). NOTE Step 6 applies to M997 and M997A1 vehicles only. Step 7 applies to M996 and M996A1 vehicles only. 6. Install clamps (28), (27), and (25) on cable (8) and oil pan bracket (26) with bolt (24) and assembled locknut (29). 7. Install clamp (28) on cable (8) and oil pan bracket (26) with bolt (24) and assembled locknut (29). 8. Install cable (8) on starter (33) with clip (32) and screw (31). Connect tiedown strap (30). 9. Apply sealant to screw (31) and cable (8) so that all exposed metallic surfaces are coated. The sealant should be evenly applied with a minimum thickness of .12 in. (3 mm). 1 4 2 3 5 7 8 9 10 11 6 12 13 14 15 16 17 18 19 20 21 22 8 24 26 27 28 29 30 31 32 33 24 25