TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 492 of 953
4-108. INTERCOM CABLE REPLACEMENT (M997, M997A1, M997A2) (Cont'd) 7. Install grommet (3), retainer (4), intercom cable (2), wiring harness (10), and two cables (6) on body (5) with two capscrews (8), washers (7), clamp (9), and two assembled locknuts (1). 8. Install three clamps (12), intercom cable (2), antenna cables (6), and wiring harness (10) on body (5) with three screws (13). 9. Install clamp (17), intercom cable (2), and antenna cables (6) on plate (16) and windshield (11) with washer (15) and screw (14). Tighten screw (14) to 71 lb-in. (8 N•m). 10. Install three clamps (19), intercom cable (2), and antenna cables (6) on windshield (11) with three screws (18). 11. Install clamp (21), intercom cable (2), and antenna cables (6) on radio rack (23) with washer (20) and capscrew (25). Tighten capscrew (25) to 71 lb-in. (8 N•m). 12. Secure intercom cable (2), antenna cables (6), and power cable (24) together with two tiedown straps (22) on radio rack (23). TM 9-2320-280-20-2 4-252 Change 3