TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 490 of 953
4-108. INTERCOM CABLE REPLACEMENT (M997, M997A1, M997A2) (Cont'd) b. Installation 1. Install intercom cable (1) on intercom (14). 2. Route intercom cable (1) in vehicle in approximate mounting location. 3. Install grommet (10), retainer (11), and wiring harness (8) over yellow tape (9), and intercom cable (1) on body (6) with two washers (12) and screws (13). 4. Install two clamps (5.1), intercom cable (1), and wiring harness (8) on body (6) with two capscrews (5.2) and assembled locknuts (5.3). 5. Install two clamps (5), intercom cable (1), and wiring harness (8) on body (6) with two screws (4). 6. Install cover (2), intercom cable (1), and wiring harness (8) on body (6) with three capscrews (7) and assembled locknuts (3). 7. Remove three assembled locknuts (3), capscrews (7), and cover (2) from body (6). Discard assembled locknuts (3). 8. Remove two screws (4), clamps (5), intercom cable (1), and wiring harness (8) from body (6). 9. Remove two assembled locknuts (5.3), capscrews (5.2), and clamps (5.1) from body (6). Discard assembled locknuts (5.3). 10. Remove two screws (13), washers (12), grommet (10), retainer (11), intercom cable (1), and wiring harness (8) from body (6). 11. Remove intercom cable (1) from intercom (14) and vehicle. TM 9-2320-280-20-2 4-250 Change 3