TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 482 of 953
4-107. INTERCOM CABLE REPLACEMENT (M996, M996A1) This task covers: a. Removal b. Installation a. Removal 1. Remove two tiedown straps (3) from intercom cable (4), power cable (7) and two antenna cables (6). Discard tiedown straps (3). 2. Remove capscrew (8), washer (1), clamp (2), two antenna cables (6), and intercom cable (4) from radio rack (5). 3. Remove three screws (13), clamps (14), two antenna cables (6), and intercom cable (4) from wind- shield (15). 4. Remove capscrew (9), washer (10), clamp (12), intercom cable (4), and two antenna cables (6) from plate (11). 5. Remove two screws (22), clamps (23), and intercom cable (4) from body (17). 6. Remove two assembled locknuts (16), capscrews (21), washers (20), grommet (18), retainer (19), and intercom cable (4) from body (17). Discard assembled locknuts (16). INITIAL SETUP Applicable Models M996, M996A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Plain-assembled nut (Appendix G, Item 201) Two assembled locknuts (Appendix G, Item 130) Two tiedown straps (Appendix G, Item 307) Personnel Required One mechanic One assistant Manual References ________________ TM 9-2320-280-24P Equipment Condition __________________ Battery ground cable disconnected (para. 4-73). TM 9-2320-280-20-2 4-242 Change 3