TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 478 of 953
5. Remove three screws (12), clamps (11), antenna cables (4), intercom cable (16), and harness (9) from windshield (10). NOTE • Perform steps 6 through 8 for old configuration. • Perform steps 9 through 11 for new configuration. 6. Remove assembled locknut (13), capscrew (19), washer (18), clamp (17), antenna cables (4), retainer (14), and grommet (15) from body (8). Discard assembled locknut (13). 7. Remove assembled locknut (1), screw (3), clamp (2), and antenna cables (4) from body (8). Discard assembled locknut (1). 8. Remove two capscrews (20), lockwashers (21), clamp (5), ground strap (6), and antenna cables (4) from antenna (7) and body (8). Discard lockwashers (21). 9. Remove two assembled locknuts (30), capscrews (23), washers (24), clamps (25), and antenna cables (4) from reinforcement (22). Discard assembled locknuts (30). 10. Remove two assembled locknuts (29), capscrews (26), washers (27), clamps (28), and antenna cables (4) from body (8). Discard assembled locknuts (29). 11. Remove two assembled locknuts (13), capscrews (19), grommet (15), retainer (14), intercom cable (16), and antenna cables (4) from body (8). Discard assembled locknuts (13). 12. Remove two antenna cables (4) from antenna (7). 4-106. ANTENNA CABLES REPLACEMENT (M997, M997A1, M997A2) (Cont'd) TM 9-2320-280-20-2 4-238.2 Change 3