TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 474 of 953
4-105. ANTENNA CABLES REPLACEMENT (M996, M996A1) This task covers: a. Removal b. Installation a. Removal 1. Remove two tiedown straps (6) from antenna cables (8), power cable (2), and intercom cable (7). Discard tiedown straps (6). 2. Remove capscrew (3), washer (4), clamp (5), two antenna cables (8), and intercom cable (7) from radio rack (1). 3. Remove three screws (11), clamps (10), two antenna cables (8) and intercom cable (7) from windshield (12). 4. Remove capscrew (14), washer (13), clamp (9), two antenna cables (8) and intercom cable (7) from plate (15) and windshield (12). 5. Remove two antenna cables (8) from antenna (16). b. Installation 1. Install antenna cables (8) on antenna (16). 2. Install clamp (9) two antenna cables (8) and intercom cable (7) on plate (15) and windshield (12) with washer (13) and capscrew (14). Tighten capscrew (14) 6 lb-ft (8 N• m). 3. Install three clamps (10), two antenna cables (8) and intercom cable (7) on windshield (12) with three screws (11). 4. Install clamp (5), two antenna cables (8) and intercom cable (7) on radio rack (1) with washer (4) and capscrew (3). (Tighten capscrew (3) 6 lb-ft (8 N• m). 5. Install two antenna cables (8) on intercom cable (7) and power cable (2) with two tiedown straps (6). INITIAL SETUP: Applicable Models M996, M996A1 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two tiedown straps (Appendix G, Item 307) Manual References TM 9-2320-280-24P Equipment Condition Battery ground cable disconnected (para. 4-73). TM 9-2320-280-20-2 4-236 Change 3