TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 462 of 953
14. Remove seven screws (1) and clamps (3) from harness (2) and body (4). 15. Remove two screws (15) and clamps (14) from harness (2) and body (4). 16. Remove two grommets (13) from harness (2) and body (4). 17. Remove four screws (19) and lockwashers (18) from backup light cover (17) and body (16). Pull cover (17) away from body (16) to allow access to harness (2). Discard lockwashers (18). 18. Disconnect harness lead 21H (21) from light harness 21G (20). 19. Remove grommet (12) from harness (2) and body (4). 20. Remove screw (5) and clamp (6) from harness (2) and body (4). 21. Remove two nuts (11), screws (8), and clamps (7) from harness (2) and body (4) 22. Disconnect two harness leads (10) from blackout switch leads (9). 23. Remove six screws (23) and clamps (22) from harness (2) and body (24). 4-102. INTERIOR LIGHTING HARNESS ASSEMBLY REPLACEMENT (M996, M996A1) (Cont’d) TM 9-2320-280-20-2 4-224 Change 3 1 2 3 4 5 6 7 11 8 12 14 15 14 13 9 10 7 8