TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 430 of 953
4-98. CONTROL BOX POWER CABLES REPLACEMENT (Cont'd) TM 9-2320-280-20-2 4-192 Change 3 9. Install positive cable (15) and NBC harness cable (16) on control box power stud (18) with washer (8), lockwasher (9), and locknut (10). 10. Install ground cable (2) on ground stud (19) with nut (4). 11. Install two clamps (11), power harness (13), and NBC harness (14) on screw (17) with plain- assembled nut (12). 12. Install cover (7) on control box (1) with four lockwashers (5) and screws (6). 13. Install two clamps (22) and power harness (13) on body (21) with two screws (20). NOTE Step 14 applies to M996 and M996A1 vehicles only. 14. Install five clamps (22) and power harness (13) on body (21) with four screws (20).