TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 410 of 953
1. Install bracket (4) on body (17) with two screws (3). 2. Install switch (14) and switch lever (15) on bracket (4) with two screws (16), lockwashers (2), and nuts (1). 3. Install cover (7) and grommet (9) on wiring harness (8). 4. Connect two leads (12) and (13) to switch (14) with two lockwashers (11) and screws (10). 5. Slide cover (7) over switch (14) on bracket (4) with two washers (6) and screws (5). 4-94. BULKHEAD DOOR BLACKOUT SWITCH AND BRACKET MAINTENANCE This task covers: a. Removal b. Installation Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Battery ground cable disconnected (para. 4-73). a. Removal 1. Remove two screws (5) and washers (6) from switch cover (7) and bracket (4). Slide cover (7) away from switch (14) to allow access to switch (14). NOTE Prior to removal, tag leads for installation. 2. Remove two screws (10) lockwashers (11), and two leads (12) and (13) from switch (14). Discard lockwashers (11). 3. Remove cover (7) and grommet (9) from wiring harness (8). 4. Remove two nuts (1), lockwashers (2), screws (16), switch (14), and switch lever (15) from bracket (4). Discard lockwashers (2). 5. Remove two screws (3) and bracket (4) from body (17). TM 9-2320-280-20-2 4-172 Change 3 INITIAL SETUP: Applicable Models M996, M996A1, M997, M997A1, M997A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Four lockwashers (Appendix G, Item 169) b. Installation