TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 402 of 953
TM 9-2320-280-20-2 4-90. ELECTRICAL OUTLET/BRACKET MAINTENANCE This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models Equipment Condition M996, M996A1, M997, M997A1, M997A2 Battery ground cable disconnected (para. 4-73). Tools Rear doors opened (TM 9-2320-280-10). General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-280-10 TM 9-2320-280-24P NOTE Prior to removal, tag leads for installation. a. Removal 1. Slide rubber boot (1) away from outlet (4). 2. Remove two screws (3) and pull outlet (4) away from bracket (2). 3. Loosen screw (8) and move shield (9) away from screws (7). 4. Remove two screws (7), disconnect harness leads 714B (11) and 790A NOTE Perform step 5 only if removing bracket. 5. Remove three screws (6) and bracket (2) from body (5). b. Installation 1. Install bracket (2) on body (5) with three screws (6). (10) and remove outlet (4). 2. Connect leads 714B (11) and 790A (10) to outlet (4) with two screws (7). 3. Position shield (9) over screws (7) and tighten screw (8). 4. Install outlet (4) on bracket (2) with two screws (3). 5. Slide boot (1) over back of outlet (4). 4-164