TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 390 of 953
4-84. HOOD WIRING HARNESS REPLACEMENT (Cont'd) TM 9-2320-280-20-2 4-152 Change 3 14. Apply antiseize compound to right composite light ground 92A (13) and install on bus bar (12) with washer (3) and capscrew (4). 15. Apply antiseize compound to right side marker light ground 92C (6) and install on hood (14) with screw (7) and locknut (5). 16. Connect harness leads 20F (9), 460B (10), and 491D (11) at right composite light terminals (8). 17. Connect harness lead 489D (1) at right side marker light terminal (2). 18. Secure leads with two clips (18) and install clips (18) on right cover plate (17). 19. Install right cover plate (17) to hood (14) with three washers (16) and capscrews (15). 20. Connect connector plug (20) to connector receptacle (19). 21. Tighten all clamps securing harness.