TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 362 of 953
This task covers: a. Removal b. Installation a. Removal INITIAL SETUP: Applicable Models M997A2, M1025A2, M1035A2, M1043A2, M1045A2, M1097A2 Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Material/Parts Two tiedown straps (Appendix G, Item 312) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Battery ground cables disconnected (para. 4-73). • Hood raised and secured (TM 9-2320-280-10). • Engine access cover removed (para. 10-15). TM 9-2320-280-20-2 4-124 Change 3 1. Slide back rubber boot (9) and remove nut (8), washer (7), and cable (1) from regulator (6). 2. Remove capscrew (3) securing clamp (4) and cable (1) to bracket (2). 3. Remove two tiedown straps (10) from cable (1). Discard tiedown straps (10). 4. Remove nut (15), screw (11), cable (1), leads (12), and cable (13) from terminal clamp (14) and remove cable (1) from battery box (16) and engine (5). NOTE Prior to removal, tag leads for installation. 4-75. 12 VOLT ALTERNATOR CABLE REPLACEMENT