TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 330 of 953
4-56. REAR COMPOSITE LIGHT ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Remove two capscrews (3), washers (4), ground 95B (5), and ground strap (6) from housing (17). 2. Remove two capscrews (15), lockwashers (16), and pull shield (1) away from “D” beam (14). Discard lockwashers (16). 3. Remove screw (2), nut (12) and clamp (11) from shield (1). 4. Disconnect leads 21 (7), 23 (8), 24 (9), and 22-461 (10) from body harness (13). 5. Remove composite light (18) from housing (17). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two lockwashers (Appendix G, Item 135) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition Battery ground cable disconnect (para. 4-73). b. Installation 1. Install composite light (18) on housing (17). 2. Connect leads 21 (7), 23 (8), 24 (9), and 22-461 (10) to body harness (13). 3. Install clamp (11) on shield (1) with screw (2) and nut (12). 4. Install shield (1) on “D” beam (14) with two capscrews (15) and lockwashers (16). 5. Install ground strap (6) and ground 95B (5) on housing (17) with two washers (4) and capscrews (3). TM 9-2320-280-20-2 4-92 Change 3 NOTE Prior to removal, tag leads for installation.