TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 297 of 953
4-37. TRANSFER CASE INDICATOR LAMP CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Applicable Models M1097, “A1” and “A2” series Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-280-24P Equipment Condition • Battery ground cable disconnected (para. 4-73). • Engine access cover removed (para. 10-15). 1. Disconnect leads 511A (6) and 511B (7) from indicator switch leads (5) on transfer case (3). 2. Deleted. 3. Disconnect lead 511A (8) from lamp assembly lead (9). 4. Disconnect leads 458B (12) and 458C (11) from fan temperature switch lead (13) and engine wiring harness lead 458A (10) and remove cable assembly (1) from vehicle. 1. Position cable assembly (1) in approximate mounting location on vehicle. 2. Connect leads 458B (12) and 458C (11) to fan temperature switch lead (13) and engine wiring harness lead 458A (10). 3. Connect lead 511A (8) to lamp assembly lead (9). 4. Connect leads 511B (7) and 511A (6) to indicator switch leads (5) on transfer case (3). 5. Deleted. b. Installation a. Removal TM 9-2320-280-20-2 4-60 Change 3