TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download

Page 283 of 953

TM 9-2320-280-20-2 4-26. FUEL PRESSURE TRANSDUCER REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Manual References General mechanic’s tool kit: TM 9-2320-280-10 automotive (Appendix B, Item 1) TM 9-2320-280-24P Materials/Parts Equipment Condition Sealing compound (Appendix C, Item 44) Battery ground cable disconnected (para. 4-73). Hood raised and secured (TM 9-2320-280-10). NOTE The fuel pressure transducer is a sensor unit for diagnostic testing. It is mounted on top of the fuel filter on the firewall of the vehicle. a. Removal 1. Disconnect multiple connector (2) from STE/ICE-R wiring harness (3). 2. Remove fuel pressure transducer (1) from fuel filter (4). b. Installation 1. Apply sealing compound to threads of fuel pressure transducer (1). 2. Install fuel pressure transducer (1) to fuel filter (4). 3. Connect multiple connector (2) to STE/ICE-R wiring harness (3). FOLLOW-ON TASKS: Connect battery ground cable (para. 4-73). Start engine (TM 9-2320-280-10) and check fuel pressure transducer for leaks. Lower and secure hood (TM 9-2320-280-10). 4-46