TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 273 of 953
NOTE Prior to removal, tag leads for installation. 1. Remove two screws (2) from brake warning lamp (1) and instrument panel (5). 2. Disconnect leads 67 (7) and 27 (3) from wiring harness leads (6). 3. Slide brake warning lamp (1) down toward steering column (4) and remove brake warning lamp (1). NOTE Place tape around lead wires to keep lamp in proper position during installation. 1. Install tape (8) around lamp (1) and lead wires (7) and (3). 2. Slide brake warning lamp (1) up along steering column (4) and install brake warning lamp (1) on instrument panel (5) with two screws (2). 3. Connect leads 67 (7) and 27 (3) to wiring harness leads (6). b. Installation a. Removal INITIAL SETUP: TM 9-2320-280-20-2 4-36.2 Change 2 4-17.1. BRAKE WARNING LAMP REPLACEMENT This task covers: a. Removal b. Installation Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Tape (Appendix C, Item 50) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Battery ground cables disconnected (para. 4-73). • Air restriction gauge removed (para. 3-17).