TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 25 of 953
3-4. ENGINE OIL FILTER ADAPTER REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Gasket (Appendix G, Item 53) Two O-rings (Appendix G, Item 210) O-ring (Appendix G, Item 211) Manual References TM 9-2320-280-24P Equipment Condition Engine oil filter removed (para. 3-5). FOLLOW-ON TASK: Install engine oil filter (para. 3-5). TM 9-2320-280-20-2 Change 3 3-5 1. Remove adapter bolt (6), gasket (5), two O-rings (4), engine oil filter adapter (3), and O-ring (1) from cylinder block (2). Discard O-ring (1), two O-rings (4), and gasket (5). 2. Remove reducer boss (7) from oil adapter (3). 3. Inspect reducer boss (7) for damaged threads or cracks. Replace if defective. 1. Install reducer boss (7) into oil filter adapter (3) and tighten to 25 lb-ft (34 N•m). 2. Install engine oil filter adapter (3) and O-ring (1) on cylinder block (2) with two O-rings (4), gasket (5), and adapter bolt (6). Tighten adapter bolt (6) to 50 lb-ft (68 N•m). b. Installation a. Removal