TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 230 of 953
4-5.12. (6.5L) 400 AMPERE DUAL VOLTAGE ALTERNATOR (PART OF 12446760) CABLE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: NOTE Prior to removal, tag leads for installation. 1. Remove locknut (7), washer (6), screw (3), clamp (4), and cables (2) and (20) from bracket (5). Discard locknut (7). 2. Remove nut (19), lockwasher (18), washer (17), and bracket (5) from stud (16) on right rear intake manifold (15). Discard lockwasher (18). 3. Remove screw (8), clamp (9), and cables (2) and (20) from bracket (11). 4. Remove locknut (14), washer (13), screw (10), and bracket (11) from right rear cowl (12). Discard locknut (14). 5. Remove three tiedown straps (1) from cables (2) and (20). Discard tiedown straps (1). 6. Remove nut (21), lockwasher (22), washer (23), and cable (20) from stud (31) on battery box side panel (24). Discard lockwasher (22). 7. Remove nut (28), lockwasher (29), washer (27), and cable (2) from stud (26) on buss bar (25). Discard lockwasher (29). 8. Remove grommet (30) from battery box side panel (24) and remove cable (2) through battery box side panel (24). a. Removal Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Locknut (Appendix G, Item 72) Three lockwashers (Appendix G, Item 191) Locknut (Appendix G, Item 79) Lockwasher (Appendix G, Item 141) Five lockwashers (Appendix G, Item 190) Three tiedown straps (Appendix G, Item 309) Manual References TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Hood raised and secured (TM 9-2320-280- 10). • Battery ground cables disconnected (para. 4-73). • Engine access cover removed (para. 10-15). 4-12.30 Change 3 TM 9-2320-280-20-2