TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 193 of 953
TM 9-2320-280-20-2 4-6.14 Change 2 4-2.2. 100/200 AMPERE ALTERNATOR CABLE MAINTENANCE(Cont’d) NOTE • Routing of the 200 amp ground cable is identical to the 100 amp ground cable, with the exception of the 200 amp ground cable being installed on the alternator with a washer, lockwasher, and nut. This procedure covers the 100 amp ground cable. • Prior to removal, tag leads for installation. 1. Slide back rubber boot (10) and remove capscrew (6), lockwasher (7), washer (8), and ground cable (4) from alternator (9). Discard lockwasher (7). 2. Remove nut (1), lockwasher (2), washer (3), ground cable (4), and washer (3) from water crossover stud (5). Discard lockwasher (2). 1. Install washer (3), ground cable (4), washer (3), lockwasher (2), and nut (1) on water crossover stud (5). 2. Install ground cable (4) on alternator (9) with washer (8), lockwasher (7), and capscrew (6). Tighten capscrew (6) to 8-12 lb-ft (11-16 N•m). 3. Slide rubber boot (10) on capscrew (6). f. 100/200 Ampere Alternator Ground Cable Installation e. 100/200 Ampere Alternator Ground Cable Removal