TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download

Page 189 of 953

TM 9-2320-280-20-2 4-6.10 Change 2 4-2.2. 100/200 AMPERE ALTERNATOR CABLE REPLACEMENT (Cont’d) NOTE • Prior to removal, tag leads for installation. • Note number of clamps and tiedown straps for installation. 1. Slide back rubber boot (9) and remove nut (12), washer (13), and cable (11) from regulator (10). 2. Remove six tiedown straps (8) from cables (1), (6), and (11). Discard tiedown straps (8). 3. Remove nut (5), lockwasher (4), washer (3), clamp (2), and cables (1) and (6) from stud (7). Discard lockwasher (4). 4. Remove nut (16), lockwasher (15), washer (14), clamp (17), and cables (1) and (6) from stud (18). Discard lockwasher (15). 5. Remove screw (20), clamp (19), nut (27), lockwasher (26), screw (22), washer (23), clamp (24), and cables (1) and (6) from bracket (25) and body (21). Discard lockwasher (26). c. 12-Volt Regulator Cable Removal