TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 183 of 953
NOTE • Prior to removal, tag leads for installation. • Note number of clamps and tiedown straps for installation. 1. Slide back rubber boot (11) and remove nut (9), lockwasher (13), washer (12), and cable (7) from positive stud (10). Discard lockwasher (13). 2. Remove nut (6), lockwasher (5), washer (4), and clamp (3) from water crossover stud (2). Discard lockwasher (5). 3. Remove two tiedown straps (8) from cables (1) and (7). Discard tiedown straps (8). a. Removal INITIAL SETUP: TM 9-2320-280-20-2 4-6.4 Change 3 4-2.2. 100/200 AMPERE ALTERNATOR CABLE REPLACEMENT This task covers: a. Removal d. 12-Volt Regulator Cable Installation b. Installation e. 100/200 Ampere Alternator Ground Cable Removal c. 12-Volt Regulator Cable Removal f. 100/200 Ampere Alternator Ground Cable Installation Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Sealant (Appendix C, Item 47.1) Two lockwashers (Appendix G, Item 134) Five lockwashers (Appendix G, Item 191) Six tiedown straps (Appendix G, Item 312) Manual Reeferences TM 9-2320-280-10 TM 9-2320-280-24P Equipment Condition • Hood raised and secured (TM 9-2320-280-10). • Battery ground cables disconnected (para. 4-73). • Engine access cover removed (para. 10-15).