Sign up to sell your inventory with NSN Lookup

TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download

Page 181 of 953

4-2.1. 60 AMPERE ALTERNATOR REGULATOR REPLACEMENT This task covers: a. Removal b. Installation a. Removal INITIAL SETUP: Tools ____ General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts ____________ O-ring (Appendix G, Item 218) Manual References ________________ TM 9-2320-280-24P Equipment Condition __________________ 60 ampere alternator removed (para. 4-2). TM 9-2320-280-20-2 4-6.2 Change 3 NOTE Regulator is part of end cover. Do not disassemble. 1. Remove six screws (1), end cover (2), and O-ring (3) from end housing (4). Discard O-ring (3). 2. Disconnect four leads (6) from terminals (7) on regulator (8). b. Installation 1. Install O-ring (3) on end cover (2). 2. Connect four leads (6) to terminals (7) on regulator (8). 3. Install end cover (2) on end housing (4) with six screws (1). 4. Check alternator (5) for correct output voltage (para. 4-2, task c.).