TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 146 of 953
TM 9-2320-280-20-2 3-69. RADIATOR INLET HOSE REPLACEMENT This task covers: a. Removal INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1 Manual References TM 9-2320-280-24P b. Installation Equipment Condition Cooling system depressurized (para. 3-60). a. Removal 1. Loosen two clamps (2) and remove hose (3) from radiator (1) and water crossover (4). 2. Remove two clamps (2) from hose (3). 1. Install two clamps (2) to hose (3). NOTE For vehicles equipped with a 200 amp alternator, it is recommended that the inlet hose be installed with the hose twisted counterclockwise and upward until a kink in the hose starts to form. 2. Install hose (3) on water crossover (4) and radiator (1) with two clamps (2). FOLLOW-ON TASK: Tighten coolant filler cap (para. 3-60). 3-124