TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 139 of 953
3-63. RADIATOR SUPPORT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Three locknuts (Appendix G, Item 128) Manual References TM 9-2320-280-24P Equipment Condition • Left splash shield removed (para. 10-17). • Right splash shield removed (para. 10-20). 1. Remove locknut (1), washer (2), large washer (3), radiator support (4), and insulator (5) from radiator (6). Discard locknut (1). 2. Remove two locknuts (10), washers (8), capscrews (7), and support (4) from airlift bracket (9). Discard locknuts (10). 1. Install support (4) on airlift bracket (9) with two capscrews (7), washers (8), and locknuts (10). 2. Install insulator (5) and support (4) on radiator (6) with large washer (3), washer (2), and locknut (1). Tighten locknut (1) to 26 lb-ft (35 N•m). 3. Tighten locknuts (10) to 26 lb-ft (35 N•m). b. Installation a. Removal TM 9-2320-280-20-2 Change 3 3-117 FOLLOW-ON TASKS: • Install left splash shield (para. 10-17). • Install right splash shield (para. 10-20).