TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 2 Download
Page 120 of 953
3-54. RIGHT EXHAUST MANIFOLD REAR HEAT SHIELD REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Locknut (Appendix G, Item 72) Manual References TM 9-2320-280-24P Equipment Condition Engine access cover removed (para. 10-15). General Safety Instructions Do not touch hot exhaust system components with bare hands. WARNING Do not touch hot exhaust system components with bare hands. Severe injury will result. 1. Remove locknut (6), capscrew (2), and clamp (1) from rear heat shield (7) and transmission dipstick tube (3). Discard locknut (6). 2. Remove capscrew (5) and rear heat shield (7) from heat shield (4). 1. Install rear heat shield (7) on heat shield (4) with capscrew (5). 2. Install clamp (1) and rear heat shield (7) on transmission dipstick tube (3) with capscrew (2) and locknut (6). b. Installation a. Removal TM 9-2320-280-20-2 3-98 Change 3