TM-9-2320-280-20 HMMWV Technical Manual Unit Maintenance Volume 1 Download
Page 830 of 890
2-43. STE/ICE-R TEST PROCEDURES This paragraph will be helpful when using the STE/lCE-R to answer diagnostic questions. Use this paragraph as a reference if you need additional information about a specific test. This paragraph contains information such as possible errors, test procedure, control codes, and additional notes as necessary. The following chart will help you find the test you need. The STE/lCE setup and internal checks (test no. G01, Page 2-763) must be perfomed prior to performing tests. A complete description and operation of the STE/lCE-R is found on Page 2-753. See TM 9-4910-571-12&P for additional information. TEST NAME TEST # ENGINE RPM (AVERAGE) 10 POWER TEST (RPM/SEC) 12 POWER TEST (PERCENT) 13 COMPRESSION UNBALANCE TEST 14 FUEL SUPPLY PRESSURE (PSI) 24 PRESSURE (PSI) 0 TO 1000 50 BATTERY VOLTAGE 67 STARTER MOTOR VOLTAGE 68 STARTER NEGATIVE CABLE VOLTAGE DROP 69 STARTER SOLENOID VOLTS 70 STARTER CURRENT AVERAGE 71 CURRENT FIRST PEAK 72 BATTERY INTERNAL RESISTANCE 73 STARTER CIRCUIT RESISTANCE 74 BATTERY RESISTANCE CHANGE 75 BATTERY CURRENT 80 DC VOLTAGE 0 TO 45 VOLTS 39 DC CURRENT 0 TO 1500 AMPS 90 RESISTANCE AND CONTINUITY 0 TO 4500 OHMS 91 PAGE # 2-734 2-735 2-736 2-737 2-733 2-739 2-740 2-741 2-742 2-743 2-744 2-745 2-746 2-747 2-748 2-749 2-750 2-751 2-752 2-733